BHTST - MINIT OFF PAINT REMOVER

  • MSDS: BHTST
  • Manufacturer: M A BRUDER AND SONS INC
  • Product Name: MINIT OFF PAINT REMOVER
  • National Stock Number: 8010-01-018-4250
Product Identification

Product ID:MINIT OFF PAINT REMOVER
MSDS Date:10/04/1985
FSC:8010
NIIN:01-018-4250
MSDS Number: BHTST

Responsible Party
M. A. BRUDER & SONS, INC.
600 REED ROAD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100

Info Phone: 215-353-5100

Cage: HO854

Contractor
M. A. BRUDER & SONS INC.
600 BROOMALL, PA 19008 US

Telephone: 215-353-5100

Cage: HO854

Ingredients

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

Fraction By Weight: 66.5%

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PARAFFIN WAX

CAS: 8002-74-2

RTECS: RV0350000

Fraction By Weight: 2.5%

OSHA PEL 2 MG/M3 (FUME)

ACGIH TLV: 2 MG/M3 (FUME); 9192


HYDROXYPROPYL CELLULOSE (KLUCEL H)

CAS: 9004-64-2

RTECS: NF9050000

Fraction By Weight: .5%


VM & P NAPHTHA (VAPOR PRESSURE 2.0)

CAS: 64742-48-9

RTECS: SE7555000

Fraction By Weight: 7.2%

ACGIH TLV: 300 PPM


ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 10.0%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 9.0%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


METHYL ALCOHOL (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 3.9%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


ISOPROPANOLAMINE PRG

CAS: 78-96-6

RTECS: UA5775000

Fraction By Weight: .4%


DYE. OIL BROWN

Hazards

Health Hazards Acute and Chronic:DIZZINESS, FAINTING SPELLS. SKIN
CONTACT, WILL BECOME RED WITH IRRITATION.
Effects of Overexposure:DIZZINESS, FAINTING SPELLS. SKIN CONTACT, WILL
BECOME RED WITH IRRITATION.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN AND
RESPIRATORY DISORDERS MAY BE AT INCREASED RISK FROM EXPOSURE.

First Aid

First Aid:INHALATION: REMOVE SUBJECT TO FRESH AIR. EYE: FLUSH WITH
PLENTY OF WATER FOR 15 MINUTES. GET IMMEDIATE MEDICAL ATTENTION.
SKIN: WASH WITH SOAP AND WATER. INGESTION: DO NOT INDUCE VOMITING.
GET IMMEDIA TE MEDICAL ATTENTION.

Fire Fighting

Flash Point:118 F/ 48 C
Extinguishing Media:DRY POWDER, CO2 OR WATER.
Fire Fighting Procedures:CONFINED LIQUID IN DRUMS EXPOSED TO HIGH
TEMPERATURES WILL RUPTURE DUE TO HIGH INTERNAL PRESSURE.
Unusual Fire/Explosion Hazard:KEEP DRUMS COOLED WITH WATER SPRAY.

Accidental Release

Spill Release Procedures:WASH OFF WITH WATER, VENTILATE AREAS.

Handling

Handling and Storage Precautions:STORE MATERIAL IN COOL AREAS.
Other Precautions:OPEN BUNGS SLOWLY TO RELEASE PRESSURE.

Exposure Controls

Respiratory Protection:USE IN WELL VENTILATED AREAS.
Ventilation:THOROUGH AIR VENTILATION AT FLOOR LEVEL.
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:103F,39C
Vapor Density:> THAN AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:73

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:OPEN FLAME.
Hazardous Decomposition Products:EXPOSED TO OPEN FLAME FORMS HYDROGEN
CHLORIDE.

Disposal

Waste Disposal Methods:STORE DEPLEATED MATERIAL IN OPEN TOP DRUM, DUMP
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.